A
new concept in the world of Aeromodelling, a combination of ripstop nylon
and carbon fibre rods,
(as used in making Kites) add to this a set of R/C
gear and you have a very interesting mix!
Falcon
(left)
The
covering material is ripstop nylon and carbon fibre for the frame. Control
is by two servos using the 'elevon' mixing method, Because of the simple
construction, the
assembly time is very quick.
Available from, ANSA Products
Air
Glider (above)
Wings use ripstop nylon and carbon fibre frame. Chuck or bungee
launch.
Available
in three different sizes
The
VoltAir Cube (left)
This revolutionary model
have no movable controls. The motor is steerable, and the throttle controls
the altitude. Made from Icarex ripstop polyester fabric and carbon fibre
struts, uses a powerful geared motor.
All can be controlled
using two channel RC gear.
Spirale,
K'a, K'max (right)
The
sail is made using ripstop nylon and
carbon
fibre for the main spar, and keel.
All can be controlled using two channel RC gear.
It can be launched
using a simple bungee arrangement
Various models are available.
